Skip to content
New Pig is the World Leader in Leak & Spill Products. Call us at 1-800-274-7447
New Pig is the World Leader in Leak & Spill Products. Call us at 1-800-274-7447
PIG® Oil-Only Absorbent Boom - BOM405

PIG® Oil-Only Absorbent Boom - BOM405

BOM405

Confine and absorb oil and fuel spills on land or water.

  • 13cm Dia. x 3m L
  • Absorbs up to 90.8 L/bag
  • 4 booms/bag

Description

    • Absorbs and retains oils and oil-based liquids - including lubricants and fuels - without taking in a drop of water
    • Booms float at surface for easy retrieval, even when saturated
    • Tough outer mesh is UV resistant for long-term outdoor use without degradation; lets fluids easily pass through to filler material
    • Rope running along length of boom withstands up to 400-lb. loads, adding strength for deployment and retrieval
    • Spunbond polypropylene skin is UV resistant up to 12 months; meets NFPA 99 standards for static decay
    • Strong, zinc-plated carbon steel attachment clips and rings allow you to link booms together for greater length
    • Bright white color makes booms easier to see in outdoor environments and clearly shows saturation level
    • Can be incinerated after use to reduce waste or for fuels blending

        Specifications

        Fluid Absorbed: Oils, Fuels, Other Oil-Based Liquids Only
        Color: White
        Dimensions: 13cm Dia. x 3m L
        Recycled Content: 98% Pre-Consumer Recycled Polypropylene Filler
        Absorbency: Up to 90.8 L per bag
        Absorbency per: Up to 22.7 L per boom
        Clip/Ring: Zinc Plated Carbon Steel
        Filler: Polypropylene
        Skin/Outer Mesh:

        Skin - Polypropylene

        Outer Mesh - Polyester
        Sold as: 4 booms per bag
        Weight: 9.7 kg
        # per Pallet: 12
        Application: Spill Response


        Additional Information

        Product Data Sheet (PDS)
        Safety Data Sheet (SDS)
        Instructions for Using PIG® Absorbent Booms

        Dock Workers Rules (Safety, Health and Welfare), 1990, 78 (1)
        Where there is a risk of explosion from electrical equipment....non-sparking tools shall be provided and used in such atmospheres.

        National Oil Spill Disaster Contingency Plan (NOS-DCP) 8.3.2
        Typical techniques involve: Application of sorbents either loose, as mats or in “sausages”. As many low viscosity chemical spills rapidly spread to cover a large surface area, these techniques are most applicable if the spread of the chemical can be confined.